10×12 Shed Plans – Off the Shelf Sheds Vs Build it From Scratch Sheds

When trying to make a 10×12 shed most people seem to go into an information overload regarding what they should or should not do. The number of options that they must consider seems daunting, the work endless, if this is your case then this article might clear up your doubts for you. One of the biggest decisions that people face when confronted with the need to make a large 10×12 shed is that whether they should simply buy a ready to assemble off the shelf shed or build one by themselves from the ground up. This is a very important part and it heavily depends upon your needs, requirements and purchasing power.

Case 1: When to get an Of the Shelf 10×12 Shed

If you have been pondering over the option of installing an of the shelf shed then there are a few things that you must know. Firstly of the shelf Do It Yourself Sheds are expensive, which is what turn many people to look for alternatives. However they are as easy as it gets as far as installing them is concerned. There are many companies which will even offer to install the shed for you! So obviously if you are low on time and are not too choosy as to what kind of a shed you want, nothing can beat a ready to assemble storage shed. However, on the other hand if you have a particular requirement and/or are exacting in your demands then these sheds are definitely not for you. Another deal breaker might be the costs involved here; at hundreds to thousands of dollars per set, of the shelf sheds costs are a lot higher than what the average can afford, so look up the offerings in your local home improvement section carefully.

Case 2: Making A 10×12 Shed from the Ground Up

As an alternative to making a ready to assemble shed, you can make one yourself. Now at first this seem like a daunting task. However it really is not. The simple difference between an Of the shelf 10×12 shed and a built from scratch one is that in the former has all the material cut and packed for you and in the latter you have to get it yourself. However in doing so you can control the costs and bring them down which is the main advantage of building a 10×12 shed yourself. A self-made 10×12 shed also allow you to exercise a greater degree of creativity so that your shed ends up looking more like you would like it to.

One important thing that you need to remember is to get some good 10×12 shed plans so that your shed making experience goes smoothly. Sheds basically come in 4 flavors – Gable, Gambrel, Lean and Salt Box. Since a 10×12 shed is a reasonably big construction it will be wise to look at either Gable or the Gambrel type of sheds as these are ideally suited for the task.

Woodworking is an Exciting and Engaging Hobby!

You can find over 12,000 Shed Plans for any and every kind Of shed Over Here [http://my-shed-plans.info].

Alternatively, You can read more on how to start into woodworking and also check out some great resources at my page on
http://www.squidoo.com/12000-wooden-shed-plans”>10×12 Shed Plans.

7 Simple House Maintenance Tasks Which You Should Not Neglect

People often neglect home maintenance work.This is a big mistake. The house needs regular maintenance just like your vehicle. The good news is you can tackle house maintenance tasks easily without disturbing your schedule. If you just take out 30-45 minutes a week or less than 10 minutes per day, it should be sufficient. Let us discuss below a few maintenance tasks which do not take a long time to complete.

1. Vacuum the condenser coils at the back of your fridge every six months or at least once per year. Also pay special attention to the door seals of the refrigerator. Keeping the door seals tight will make the refrigerator work efficiently while consuming less power. To test the door seals, close the refrigerator door while putting a dollar bill in between. Now try to pull out the dollar bill. If you cannot easily pull out the note it indicates the door seals are in good condition. However if the bill slides out easily, it is time to replace the seals.

2. Air conditioners are one of the most overlooked appliances when it comes to maintenance. However, they can prove very costly to repair if they become faulty. Regularly inspect the condensation hose to make sure water can flow freely through it. Keep the screen around the air conditioner free from debris so that the air can flow easily and without obstruction. Periodically clean the air conditioner grill.

3. Check and repair leaky water faucets. In most cases, worn out washers are the main cause of leakage. Replacing the washers can get rid of the leakage problem most of the time.

4. At least once per year, drain water from the water heater and clean the inside of the heater. Water heaters need regular maintenance just like any other appliance. Water has sediment suspended in it. These particles settle at the bottom of the tank, causing damage to the floor of the water heater.

5. There may be guest bathrooms which you do not use frequently. Remember to flush these toilets regularly in order to prevent grime or any other kind of build up.

6. Inspect your fire extinguishers regularly. Make sure the gauge shows adequate pressure and there are no visible signs of damage or wear and tear.

7. Inspect your house roof regularly for damages or leaks. You might need to call professional help in case the roof needs repairing.

For difficult house maintenance and repair tasks you need professional help. Visit our website if you are looking for
http://www.plumbtec24.co.uk”>plumbers in Glasgow or
http://www.plumbtec24.co.uk/boiler-repairs-glasgow-2/”>boiler repairs Glasgow.

1 Thing You Should Have For Home DIY

Getting a laser measuring device proved to be one of the best things I have ever purchased for home repairs and improvement. I cannot deny that this tiny inexpensive device has cut down my home repair and improvement time by a lot, I have saved so much time to concentrate on other projects. If you have any experience making home repairs, then you should know exactly what I am talking about, measurements can be really time consuming and sometimes very annoying. For me it was a day trying to measure a hard to reach part of the floor behind my kitchen cupboard that really pushed me to finally buy a laser measuring tool.

Buying a laser tool is something which you definitely won’t regret, not in a million years. For everything you can do with it, as well as the price you save, it is definitely worth every single penny, in other words, the price is right. It doesn’t matter what you want to do around the house it will come in handy, Whether you want to measure and re-fit some tiles; Whether you want to move your bed or sofa; Whether you are laying a new carpet. It all becomes much easier when you can just stand there and point your laser and in a split second you have an extremely accurate measurement for none of the hassle.

Think of just how easy everything suddenly becomes, measuring just becomes so simple and painless (I really hated those annoying measurements which I used to have to make; now everything is brilliant!). One thing that gets me every time about this tool is the fact that the measurements which it makes are dead accurate. I recently measured the distance from my front door to the main road and it only took me 2 seconds and the road is 500 meters away. That was incredible! When I used a measuring tape to do the same thing it took me over 10 minutes and it was not as accurate.

When most people thing of home repairs, they think of purchasing hammers, saws and automatic drills etc. but many people overlook how handy it can be to have something which measures fast and accurately. I honestly believe that if you do a lot of work at home DIY, then you cannot escape getting a laser measuring device; they really will save you time and lots of headaches.

Besides exercising at home, Michael loves nothing more than to do some repair around the house. Michael also runs a website dedicated to adjustable dumbbells [http://myadjustabledumbbells.com]

5 Steps To Remove Stain On Your Fabric Furnishings

Stains on fabric furnishings are unsightly and could be difficult to remove. It is very crucial to attend to the stains as quickly as possible to remove the stains completely.

If there is excessive spilled fluid on the sofa, carpet or mattress, place some kitchen paper on the spilled fluid and apply pressure using your palm to absorb the spilled fluid. Do not wipe the stain as this will cause the fluid to spread and widen the stain on the fabric furnishing.

The next step is blotting stain. This is the basic and immediate step to do when removing stain from any soft furnishings.

Step 1

Always blot as much of the stain as possible by using a clean, damp cloth immediately after spillage occurs.

Step 2

When you are blotting the stain, simply put your thumb on a clean damp cloth and apply some pressure on the stain to let the cloth absorb as much of the stain as possible. Do not scrub or wipe the stain as you may end up damaging the fabric or cause the stain to spread which will make the stain even more difficult to remove.

Step 3

You may use a little dish washing detergent to blot the stain and use another clean damp cloth to remove the soap if the stain cannot be removed.

Step 4

If you are not satisfied with the result, repeat the above steps till the spilled residue is removed or lightened.

Step 5

Blow dry the damp area with cool air after the blotting process.

Do not be discouraged if the stains cannot be removed completely. There are many types of stains that may occur on your soft furnishings – curry, red wine, urine, pen, lip stick etc – which sometimes cannot be completely removed just by blotting with mild detergent.

Different types of stains may need different combination of products and steps to remove the stains more effectively, and more often than not, these suggested “household” products may not be readily available in your home or office.

If the stain still cannot be removed after following the above-suggested steps, contact a professional cleaning service immediately.

Professional cleaning service providers would have the necessary skill, equipment and stain removal products to treat and remove the stain on your furniture. We offer
http://www.dh-asia.com/services”>professional cleaning service for sofa, carpet and mattress, using revolutionary dry cleaning technologies that use minimal fluid and contain no harmful chemical.

De Hygienique’s revolutionary
http://www.dh-asia.com/services”>professional cleaning services is completely dry, convenient, effective and uses natural biodegradable cleaning compound that can be done in your premise.

5 Tips to Help You Use LED Lights for Christmas

For Christmas decorations, you can opt for LED lights. While they cost a bit more, they stand the test of time and utilize less power. if you know how to hang and fix LED lights, you can decorate your home a lot better than other people. Follow the 5 tips given below before using them as Christmas decorations.

Tip 1: Decide on Brightness Level

What brightness level do you like? For brighter displays, you can choose a light string with lights fixed not far away from each other. if you are unable to find this type of string, you can buy 2 light string sets and then put them together to get the same results.

Tip 2: Choose a Color

White LED lights emit light that is a little bit blue. In the same way, the light emitted by incandescent lights is a little bit orange. Hanging different colored lights side by side will be a bad decision if you are after a beautiful uniform color. You can choose any color based on your personal taste.

Tip 3: Know Power Levels

The beauty of LED lights is that they consume a lot less power than the older incandescent lights, which means you can use more lights without raising your utility bills. Make sure you know the power that your LED lights will consume in watts. Most lower power LED lights consume no more than 1 watt.

Tip 4: Know How to Hang LED Lights

Do you know how to install them? If you are doing it for the first time, make sure you know how to fix the lights outdoors and indoors. You can change these lights on walls, trees, and pillars. Usually, people use them for decorating trees without spending a good deal of money.

Tip 5: Understand How to Repair them

The strings comprise a pair of wires acting as a parallel circuit. And each circuit gives power to half of the bulbs on each string. If one light on the circuit burns, it breaks the circuit turning off all of the remaining lights on the string. Therefore, you should learn how to fix LED lights on your own.

For this, you can use a good quality voltage meter. Using the meter, you can detect voltage on each end of the wire. If you find a point with no power, you have to replace the light in that area. You won’t need to spend several hours in order to detect a non-functional light on the string as long as you own a voltage meter. You can get help from a friend who knows more about this stuff. If you don’t own a voltage meter, you can buy or borrow one.

So, LED lights for Christmas are easy to use if you follow the tips given above. As a matter of fact, LED lights are brighter than other types of lights and don’t consume that much power. That is one of the most common reasons they are an ideal choice for Christmas decorations.

http://www.allround-tech.com/”>LED Christmas lights is easy as long as you know how to hang and repair them properly.

3 Powerful Tips For Fast Water Restoration

Quick water restoration is of utter importance to protect your property from possible damages and prevent the risk of health hazards in your home due to the growth of mold. The water restoration process must be fast to minimize the degree of damage, and in order to speed up the process you should know about a few aspects which will help you to complete the restoration process within a time limit of 24 to 48 hours. So let’s find out the fast and easy solutions for water restoration at home.

Tip #1 – Solution For Quick Water Removal

When it comes to restoration, you should look for proven, effective methods that will give fastest results. You can simply start by using a mop or towels to absorb the water initially. You should also turn on the ceiling and window fans to speed up the drying out of water. In addition, turning on the heater and dehumidifier will help to quicken the restoration process. In case of flooding caused by overflowing toilet or other leakages, seeking help from the insurance companies will be a better idea as most the of the companies provides service for such water restoration. Heavy duty fans and water extraction vacuums are invaluable tools designed to make the water restoration fast and easy.

Tip# 2 – Protective Measures For Flooring And Carpets

In most cases of flooding, the flooring and carpet get highly damaged before the if protective measures are not taken properly. To prevent the damage of your costly carpet and wooden floor during the water restoration process you should carefully remove the carpet and padding first. Then you can use sanitizing solution to clean up the flooring to prevent the growth of mold on your floor. To remove water from the carpet you can use vacuum extraction pumps which are primarily designed for water restoration. Don’t forget to make sure that the sub flooring is also completely dried out during the water restoration. Otherwise there will be possibility of mold growth.

Tip# 3 – Protection For Upholstered Furniture

The success of complete restoration depends on the minimizing the risk of damage to upholstered furniture. To ensure the minimum amount of damage to your upholstered furnishing the restoration process must be a quick one. Heavy duty fans, dehumidifiers, air-blower & driers are considered quite effective for removal of water from the furniture. Again you can simply place the upholstered furniture in a warm place outside your home, preferably if it’s a sunny day. If the water removal takes more than 48 hours then you should contact a professional restoration company.

Water restoration process is meant to reduce the damage of your property and home to the minimum level possible including the prevention of hazardous mold growth. But you must act accordingly to minimize the risk. All you have to do is follow the easy methods described above to get effective results from a quick restoration process.

Frank is Education Director for Water Damage Local.com.

Basement Flooding Tips

10 Things To Remember When Installing Tile Flooring

As anyone knows who has ever carried out a remodeling project in their homes, this undertaking can be very expensive. But if you can do a lot of work yourself then you can actually save yourself money. One particular project you may want to try for yourself is to install tile flooring as this could end up saving you a lot of dollars in the long run.

If you were to contact one of the many flooring installation contractors that you see advertised in your local newspaper or phone directory, you may find that they will charge you an extortionate amount of money to do the work for you. However, by following the 10 points that we provide below you should be able to install tile flooring that not only looks great but which will get your friends and family talking about every time they see it.

1. First off buy yourself a good set of knee pads which you can purchase from any good quality DIY or hardware store. Not only will your knees be thanking you but the rest of your body will as well.

2. Before you start laying the first tile spend a lot of time working on the layout of the tile flooring. You don’t want to find yourself in a position where you have just laid the last tile only to find that you have made a mistake at the beginning and so you need to tear it all back up again. Taking a little extra time on working on the layout will save you a lot of heartache as well as headaches in the future.

3. At all times follow the recommendations made by the manufacturer with regard to the installation of their tile flooring product. These people have been in the business for a long time and they know what works and what doesn’t.

4. Now you are going to start to install the tile flooring but take your time over it. A rushed job will end up becoming a botched job and could result in you having to take up and re-lay the flooring again.

5. Only lay the tile flooring when you are well rested and are able to fully concentrate on the project.

6. Buy the tools which are best for the job. Although you may think this is a waste of good money you never know you may want to use them again in the future.

7. When getting your tools and materials, ask questions of the staff in the hardware or DIY store. Remember they are actually paid to help and will probably have some knowledge on the project that you are going to be carrying out.

8. Make sure that your workspace remains clean. Not only will this ensure that your tile flooring will last longer but it will also keep you safe while you are working.

9. As the saying goes, practice makes perfect. The more tiles that you lay, the better you will get at it. So when you first start to install tile flooring choose an area where it is less noticeable or where less people are likely to walk past it.

10. The final point is pay attention to the detail. By doing this you will not just have a nice looking tile flooring but a great one.

Keep these points in mind when you start to install tile flooring and you will be amazed at just how easy it is and just how great it looks once completed – and think of all that money you have saved as well.

Ernest Jarquio is a dedicated family man hopelessly addicted to do-it-yourself projects. For more information, visit his website, where he discusses various subjects such as installing tile flooring [http://www.flooring2roof.com/installing-tile-flooring.html], garage tile flooring [http://www.flooring2roof.com/] and cheap flooring tile [http://www.flooring2roof.com/tile-flooring.html]. Read various articles on the different aspects of hardwood, bamboo, laminate, tile and vinyl flooring.

3 Dumbest Reasons Why Boat Building Projects Fail

So you decided to build a boat or you’re just wandering around the internet and happened to read this article. Well anyway, this time I want to talk about the 3 dumbest mistakes that eager boat builders happen to make and why you don’t have to.

Before proceeding further, I would like to mention that these are mistakes that I have seen people doing on numerous occasions and I’ve also heard and read about elsewhere.

So here goes:

  1. Garage door not big enough to get the boat out – I mean… this is ridiculous. How can you not notice that whilst in the middle of the whole process or something. This has actually happened 4 times to my knowledge, but that’s only what I’ve heard. Probably tens of people have faced that interesting problem. Moral of the story – take your time to measure the heights and widths and you will be okay.
  2. Different boat plans mixed up through the whole process – What can I say, there’s not much to add on this one. How the heck can that happen anyway?
  3. Sudden climate change in the workroom – Before even starting to work with wooden boats you should take into consideration that uncontrolled rapid drying will destroy your wooden boat. There is a process called “equilibration” which means that wood will try to equalize itself to its surroundings either by absorbing or desorbing moisture and if that happens too rapidly it will cause bad damage to your wooden material.

So for the conclusion I hope you learned something. Always be aware of the simplest things that tend to be forgotten.

For the best online boat building tutorials and boat plans visit Boat Drawings and Tutorials [http://boatplans1.com]

8 Tips for Decorating Shelves

Shelves can be a catch-all for clutter, dust collectors, and visual nightmares. Creating fantastic displays on your shelves doesn’t have to be difficult though. Shelves can offer an opportunity to be creative, useful, and add a beautiful decorative touch to your home. One member of Pinterest has found over 100 pins dedicated to decorating the shelves of your home. But breaking it down, here are 8 easy ideas to help you decorate your shelves.

1. Create a contrasting back: A beautiful way to make your shelves stand out is to change the background of the shelves. You can go dramatic and paint it much darker or lighter, or go subtle and only move a few shades off. Either way, the contrast will draw the eye in.

2. Change the shelf height: For those who think outside the box, a great way to break things up is to make the shelves various heights. If your shelves are adjustable, you can change things up making each a different level. This asymmetry can add appeal and interest to your shelves.

3. Go bigger and keep it simple: Some people feel the need to fill up the entire space. But often all those little knick-knacks and bric-a-brac turn out looking cluttered and collect dust. Not having to dust each little piece is a reward in itself. Go bigger and more simple with larger vases, bigger candles, and simple designs. The simplistic look will avoid clutter and make dusting easier.

4. Use decorative boxes and baskets: If your shelf is not simply decorative, but also used for storing items, it can still be attractive. Keeping items in decorative baskets or boxes can still give you the visual appeal you are looking for, while containing the items you need.

5. Create visual triangles: A well known designer technique that people may not notice at first is visual triangles. When grouping objects together, try to create visual triangles with items. This can be done with colors, shapes, sizes, or items. But the visual triangle will look pleasing without looking staged.

6. Group like with like: Grouping similar items or creating a theme can set a mood for an entire room. A beach theme, with shells, sailboats, lighthouses, or even jars of sand would be a good example. But groups can be of functional use as well, such as serving sets, tea sets, or canisters.

7. Add lighting: Creating an eye catching display can be as easy as adding lighting to the shelving. Backlit items, overhead lighting, or even candlelight can draw focus to certain spots. Running stringed lights along edges or behind can give an overall glow to your shelves.

8. Share your passion: If you have something you are passionate about, share your passion with a collection of items. Anything from movies, books or belt buckles, if you love them, share them. Spotlighting your favorite items can be an excellent way to create a look you love.

Whether you have a few spare shelves or a wall to wall bookcase, you can turn your shelves into a beautiful display. Collecting items from around your home, hunting for the perfect piece at a thrift or antique store, or searching online can be a thrill when you find the right items for your ideas. Allow your personality to shine through with a look that makes your house your home.

Alexa Campbell is on her way to completing her certification in interior design from UC Berkeley and loves expressing her ideas about home design through her
http://kwdesignblog1.wordpress.com/”>blogs and online writing. Her inspirations include Kristina Wolf of
http://kristinawolfdesign.com”>Kristina Wolf Design, Inc., an interior decorator in the San Francisco Bay Area.

7 Simple Woodworking Plans Ideas

Are you skilled with your hands? Have you ever thought about working with wood? There are a lot of things these days that are made of plastic including furniture, toys, and shelves. There are a lot of great woodwork plans that you can make anything with.

Remember the good old days when people took pride in their work and men who were good at woodworking would make furniture by hand? There are many great things about working with wood including making amazing things that you can take pride in. Here are seven woodworking plan ideas that you can do right in the comfort of your own home.

1-Bed Plans

This might be a good reason to get your family involved in a project. You and your whole family can pick exactly how you want the bed to look, the color of the wood, and the kind of wood you want to use.

2-Outdoor sheds

Have you been to a home improvement store lately and see the price of outdoor sheds? Why pay an outrageous amount of money when you can get the materials and just build the shed yourself? You can make your shed the size and shape you want and save yourself a lot of money.

3-Rabbit hutches

Rabbits make great pets, but finding them a rabbit hutch can be expensive. Did you know that you can build your rabbit a better rabbit hutch then what you can find at a pet store? Imagine a cage made of wood instead of wire? Wooden hutches are much better for rabbits than wire cages, and your rabbit will now have a better home.

4-Kids playhouse

You want your kids to have a safe place to play right? Why take the chance of some store bought playhouse being dangerous? The benefits of building your own kids playhouse is that you can design it yourself, and put in a lot more safety features than something you get from the store.

5-Dog house

Dog houses can be pretty expensive, and for all the money you are spending you might as well build it yourself!


Do you want a great weekend project? How about building your own carport? Carports are made of plastic and metal. If you make your own carport out of wood, it will be a lot stronger than what you can buy at a store. What better way to protect your car than a wooden carport?

7-Boat plans

Yes, you heard me right even boats! Most boats these days are made of plywood, and wouldn’t it be better to build your own boat rather than rely on some flimsy plywood boat? You can buy the wood and make the boat in any way shape or form that you want as long as you follow a good set of woodwork plans.


Woodworking is a skill that many people have and are able to make a profit off of. There are a lot of things now that are made of plastic, but these days people are preferring to buy certain things out of wood. Anyone who has woodworking skills can make such amazing things as dog houses, carports, and rabbit hutches that people will appreciate and pay handsomely for.

If you have decided that woodworking is for you and you would like some quality woodwork plans [http://www.woodworkplans.net] then woodworking table plans [http://www.woodworkplans.net/woodworking_table_plans.html] are a great place to start at. Click on the link now to get started!