3 Simple Steps to Home Organization

Take it One Room at a Time

When it comes to home organization it can seem like a very daunting task. Just like with any big project you have to break it down into manageable sections. You’re never going to accomplish the entire task in one weekend so you have to know that going in.

Most people give up on the task of organization before they even start because they know it’s going to take a lot of work and effort. By breaking down the job of home organization into smaller tasks separated by rooms you’ve already set yourself up to win this battle. Like the old saying goes “You can’t eat the elephant in one bite.”

Start with a smaller room. Never start with your living room. Find a room in your house that needs to be organized. Maybe it’s a home office, a playroom, or even a bathroom. It’s best to start with a room that is not that messy that way it’s a quicker way to finish the room, and it builds up steam to help push further into “eating that elephant!”

Visualize the room being organized

Once you’ve picked the room that you want organized, start visualizing what that room will look like once its finished. Will you keep all the major furniture or have you been itching to toss out that old recliner?

Get a visual in your head of what the room would look like ideally if it was organized. Is the room missing something that you need to help it get organized such as bookshelf or a cubby cabinet to store things? This is why visualizing is so important you have to know what you need and what you don’t need so you can take action in the next step.

If you’re visualizing something new to put in the room, make sure it serves an organizational purpose. We’re trying to
http://www.funktionalhome.com/organize.html”>de-clutter and organize not buy new crap to shove in this room and make it look pretty. We want it to be functional and great looking!

Take Action

Now that you know which room you want to organize and how you want it look. Now it’s time to take action, get out your silverware to take a bite of that elephant!

The best way to take action is remove everything from the room. Then slowly put things in there that you must have. Remember, it has to serve a purpose in the room or otherwise it’s just clutter.

If you have lots of little odds and ends combine them in an organized manner. If you have lots of papers put them in folders and organize the folders appropriately. If you’re working on an office then you typically have a desk and a chair.

If you’re working in child’s playroom make sure and organize their toys into similar groups. Whether it sports stuff, dolls, or furniture, everything must have a place.

That’s the key to home organization, everything must have a predetermined place and making sure they get put back into their designated place when you’re finished using them.

By following these three simple tips your house will start taking shape and soon the entire thing will be a organized machine. Remember organizing is not only about creating a place for everything, but ‘replacing’ everything. Just a little maintenance here and there keeps you from having to completely re-organizing the entire room six months down the road!

Enjoy this article? Come check out our blog and learn more Home Organization Tips. Alexis Rubin is a
http://www.funktionalhome.com/about.html”>Professional Home Organizer in the Denver area and would love to help you get organized.

5 Tips on Building Your DIY Garden Sheds

1 – The Base –

Start off by laying the floor of the garden shed. The actual base for the shed must be firm and level.

We recommend that you fix the floor to the timber bearers.

2 – Next Step – Sides

Next take the gable end and an end panel, sit them onto the floor, Fix these two parts of the shed together to form one corner.

Add more of the side panels one at a time until you have all four sides attached.

3 – Next step – The roof:

Place the two roof panels on top of the garden shed. Note, if you base is not level you will find that the end of the roof purling will not sit flush to each other.

4 – Next Step – Fixing the roof and sides down.

Now you will need to fix the sides and roof down, Note: At this stage it is important to check that the side panels are running straight.

Look down the side of the garden building to make sure there is no “Dog Legging” if there is simply push panels into correct position before fixing down.

Next put the roof truss in place, fix it up to the ridge first then fix the ends up the underside of the top rails of the side panels. One end at a time.

This make take the application some pressure.

5 – Next step – The felting

This is the final stage to completing your DIY garden shed build. Jobs left, Felting the roof, fixing of the fascia Boards, cover lats and Corner Beads.

Kris

http://www.shedsdirect.net

To see images with the above article please visit my blog. [http://www.shedsdirect.net/blog/2008/09/02/5-tips-on-diy-garden-sheds]

2 Best Jobsite Table Saws For Heavy – Duty Users

Purchasing a jobsite table saw is a serious investment and one that will surely affect you in the long-term. Consequently, finding one that will continually meet your needs as a craftsmen is possibly the most crucial step in the buying process. The most industrial, heavy-duty users clearly require the most high-quality equipment, and, fortunately, in the world of jobsite table saws, there are two that seem to cast shadows over the competition. With commanding power and innovation these saws come from Makita and Bosch, two manufactures that have continually shaped the industry with high-performance tools and technology.

Makita’s 2704X1 (10″) contractor’s table saw is a superior quality saw designed for superior accuracy. Its precision machined, die cast aluminum table top delivers exactly that, an uncommon degree of precision and strength throughout every project. The table-top is designed to remain flat despite heavy work and wear, and with a large cut capacity, even without its standard right extension table, (3-5/8″ at 90 degrees and 2-1/2″ at 45 degrees) the saw roughly rips 4x material in one pass. With its extension table, on another hand, the saw’s capacity is even larger ripping 4 x 8 sheets of plywood with surprising ease. The saw also has a built-in storage area with the capacity to hold your most frequently used accessories like a saw blade, rip fence, miter gauge, and etc. This on-site storage keeps your most returned to items all in the same place and perfectly within reach. Additionally, the table saw features wider, deeper T-slot miter grooves to accept the most industrial T formed shanks, even those made by different manufacturers, rendering the saw versatile and universally accommodating. For the most efficient and smoothest blade depth adjustment the saw also offers a simple two pole slide system for raising and lowering the blade. Lastly, but certainly not least, the saw packs a 15 amp motor, to perfectly couple supreme power with uncommon precision.

Bosch builds another jobsite table saw to compliment the most heavy-duty users. Their 4100-09 (10″) worksite table saw is built with a seriously heavy-duty construction designed to withstand the many bumps and bruises of jobsite life. Built for durability the tool is coated with a powder paint finish to maximize overall longevity, and with Bosch’s patented Gravity-Rise stand, the saw is surprisingly simple to manage. Ensuring the motions of set-up and take down are a much less frustrating process, the stand is uniquely impressive. Additionally, the tool is supremely portable, and with a collapsible design the tool stores well and transports from one jobsite to another with terrific simplicity. The table saw additionally boasts 8″ treaded pneumatic wheels so, like a fierce, all terrain table saw, the tool confidently maneuvers through difficult jobsite environments. Ultimately, Bosch’s 4100-09 table saw is designed to bring heavy-duty craftsmen a table saw and stand that will consistently up the ante with brilliant power, precision and authority.

Exemplifying the most elite of the jobsite table saw community, these saws will prove a sound investment to those heavy-duty craftsmen searching for long-term commitment.

A student at the Univ. of UT, Mallory is currently earning an English degree. Specializing in tool parts and web communications, she joined M&M Tool 3 yrs ago adding to their over 150 years combined experience. For over 70 years M&M Tool has provided the best service to the tool industry with replacement parts, sales, & service to expert woodworking products, machinery and power tools like
http://www.toolsandmachinery.com/makita-tools-3108/makita-saws-3111/makita-table-saws-3112/makita-10-contractors-table-saw-with-stand-166586.html”>Makita’s 2704X1 table saw, and
http://www.toolsandmachinery.com/bosch-tools-3698/bosch-saws-4798/bosch-table-saw-4803/bosch-10in-worksite-table-saw-with-gravity-rise-wheeled-219673.html”>Bosch’s 4100-09 table saw.

10×10 Gable Shed Plans – Things to Consider in Building One

With its straightforward design and classic lines, it’s really no wonder why a gable style shed is the most typical shed we see these days. Compared to other shed, it’s pretty straightforward to build a gable shed. And the good thing is, there are lots of 10×10 gable shed plans you can choose from.

When you build a 10×10 shed in your yard, you not enjoy the benefit of having extra space to store things, you could unknowingly increase your property price as well. It’s a known fact that properties with extra well built structure have increased value in the market. A very good added benefit if you ask me.

Before you go hammering away, there are many things you need to prepare and thoroughly consider first. Among the important ones are the following:

Location

Of course, to build a 10×10 gable shed you’d obviously need an area in your property that’s more than that size. Make sure also that area you’ve chosen has additional room to make it easier for you to move around during construction.

Generally, important things to consider in choosing the best location for your shed is that it is not on property lines or septic tanks. An area with wet grounds does not make an ideal location as well. The soil could easily shift and the structure would gradually disintegrate when that happens.

When you’ve chosen a good area, make sure that you clean and clear the site. It would also be good to have an evenly leveled site.

Building Permits

A 10×10 gable shed would most like require a permit from your local government. You can inquire this information from the zoning department of your town or state. An inspector would check if you’re complying with proper building code implemented in your area. This is done to ensure your safety as well as that of your family and neighbors.

Before you apply for the permit, however, you need to prepare the permit drawings. This consist of site details, cross section as well as elevations.

10×10 Gable Shed Plans

Lastly, you will need to get your hands on excellent 10×10 gable shed plans. This will help you prepare beforehand the tools and materials needed for construction. Also, using the bills of materials included in the plan will help you calculate the estimated cost of the whole project. You will be able to budget appropriately your funds.

During construction, you will benefit greatly if you use plans with easy to implement instructions as well as detailed working diagrams. You will observe that you will be able to work faster if the written instruction is accompanied by clear illustrations.

So, if you’re in the process of going over 10×10 gable shed plans, I suggest you check out this really helpful resource here:

www.ShedBlueprint.info

10 Costly Sound Proofing Mistakes and How to Avoid Them

Mistake 1: Hiring an Expensive Acoustical Consultant

Most people should be able to isolate and solve noise problems themselves without ever retaining an acoustical consultant.

If you are considering a consultant, unless you have a big budget, it’s important to do a little homework and learn something about your noise problems and how they might be solved.

A consultant will approach any problem you have in a very scientific and systematic fashion. There is nothing wrong this except that it is time consuming and consultants bill by the hour. Also acoustical consultants are not cheap. So rather than having a highly paid professional sniffing around trying to determine the source of your problem, roll up your sleeves and do some detective work yourself. You can crawl around in a basement or ceiling or meet with your neighbors in an attempt to determine sources of noise pollution without spending a cent. A consultant will charge a lot of money to do these things for you.

If you do decide to bring in a consultant at some stage it will be far more cost effective if you have determined 1) the source of the noise pollution, 2) some of your options for dealing with the noise and 3) the extent to which the various noises bother you. The consultant will not know which noise causes you the most stress. You’ve got to give this careful consideration. The interesting thing about soundproofing is that because noises mask each other, removing one noise often makes another appear louder and more annoying. As you make your home more soundproof it will be quieter but ironically this will mean that you can hear other noises. You need to think carefully about these issues and draw up a noise priority list based. This list should illustrate which noise pollution impacts the most on your quality of life. Always put sleep interference at the top of your list. Noises which interfere with a good night’s sleep can be the most troublesome and stressful and can impact directly on your health.

Mistake 2: Trying to Get Even With Your Noisy Neighbors

A lot of noise pollution is caused by noisy neighbors. It’s normal to assume that any neighbor who makes an annoying noise must be inconsiderate. In reality most neighbors are actually reasonable people and they might be quite unaware that they are creating a noise problem. So as a first step try having a friendly conversation with your neighbor. Use language like: I need your help with something which you are probably not even aware of. Your dog seems like a great pet and friend but sometimes he barks during the early hours of the morning and it wakes me up. I can’t get back to sleep which means I’m very tired during the rest of the day. I know it’s normal for dogs to bark – the solution might be as simple as keeping him inside or in another part of the yard at night. Do you mind if we discuss this some more, perhaps you could come over for a coffee and I’ll show you where my bedroom is and why it affects me so much.

It is important to keep the discussion friendly even though you might feel very annoyed with your neighbor. People with barking dogs are usually aware of the problem and secretly hope that no one will complain. This means that they also expect that one day they will have to do something about the issue.

Under no circumstances should you consider retaliating by making your own noise, this will never solve the problem and could result in the police becoming involved.

Mistake 3: Buying “Any” Soundproofing Material

There are many different types of noise pollution. The type of material and the techniques you need to use to solve your problem will require a good understanding of the exact noise source and problem. The simplest noise variables are how high pitched the sound is (e.g. bird chirping) or how deep it is (e.g. stereo sub-woofer or boom cars). Other important variables are how loud the noise seems, where it is coming from, the sorts of building material that it is passing through (e.g. windows, walls and floors) and whether the noise if continuous or intermittent. These are not difficult things to determine, but you do need to do a little homework and preparation and you certainly need to know these things before you buy any soundproofing materials.

You need to be able to describe your noise problem very clearly, know its source and know what type of solution you are seeking. You also need to know what sorts of solutions you can use e.g. do you lease your apartment and therefore must not make any permanent changes to the structure?

Mistake 4: Listening to “Wives Tales”

Beware that some materials and techniques just do not work despite the endless exposure that they seem to attract. What’s more frightening is that using the wrong material or technique could actually make your problem worse, for example some materials will actually appear to make a noise louder or change it to something even more irritating.

Aside from the obvious myths around egg crates and plastic window film which are essentially useless as soundproofing materials, other materials and techniques to be suspicious of include:

· Old carpet

· Cardboard

· Special paints

· Fibreglass batts e.g. the type used for thermal insulation

· Rubber e.g. old rubber mattresses and floor mats

· Any type of mattress secured to a floor or wall

· Dry cellulose fibre pumped into walls or floors

· Timber sheets (unless they are uncoupled)

· Corrugated or pyramid shaped foam like the type used in recording studios – this does not stop noise passing through walls, it simply dampens noise which is already in the room.

In short you need a credible, unbiased guide to solving your noise problems. The alternative is trying to sift through the science, logic and truth behind each material and technique and then learning how and where to install the material. Even if you had the time to attempt this self education, it is a very frustrating process and there is no way of knowing whether you really have really reached the right conclusion until after you’ve completed the job. You could end up spending more time and lots of money on methods and materials which do not properly solve your problem.

Mistake 5: Coping When you are Exhausted & Annoyed

Noise pollution can drive you to despair and can literally impact on the health and happiness of you and your family. As a matter of urgency you should consider finding an immediate “compromise solution” to your problem. The most rational, cheapest and fastest compromise is a set of high tech ear plugs. People often think that I am joking when I say this. I’m not. These days it is possible to buy very comfortable and very effective high tech ear plugs which are designed to reduce significant noise. You can buy one or more pairs and start catching up on your sleep and thinking time. Once you have reclaimed your sanity you will be in a far better state of mind to embark on manageable longer term solutions to your noise pollution problems.

Mistake 6: Replacing “Float” Glass with “Laminated” Glass

Laminated glass does give some additional benefit but not as much as you might think. In addition laminated glass is expensive. You would actually achieve a much better effect if you left the existing sheet of glass in your window and secured a second slightly thicker piece of normal (float) glass to your window frame with an air cavity of an inch or two between the two panes. A four inch (100mm) separation between the sheets of glass and some moisture absorbing powder in the cavity gives excellent results and can be done on a budget. This technique is definitely easier than replacing existing window glass with a new laminated pane.

Mistake 7: Complaining to Local Authorities about the Noise

I hate to say it, but most things involving complaints to Local Authorities are time consuming, costly, demoralising and often get you no closer to solving your problem. Anyone who has ever locked horns with any type of bureaucracy will tell you that even when you have a valid complaint the bureaucracy will take forever to do anything. In the meantime you still have to put up with the noise problem and you get more and more stressed and feel more and more like you have lost control over your private world.

I’ve heard of people who have been asked by local Council to keep a diary of their noise problem for a whole year! Unfortunately most organisations like local government or even the police do not have the noise measuring equipment or proper understanding of noise and environmental laws to properly enforce them anyway.

So instead, put all of your energy into things that you have control over and look for quick wins which will build your confidence and restore your quality of life. The ear plug advice in Mistake No. 5 is a simple example of a quick and inexpensive win over annoying noise pollution.

Mistake 8: Taking A “Best Guess” on Installation Techniques

Even if you have bought effective soundproofing material, most of the effectiveness of the material will actually come from correct installation.

There are two installation considerations:

1) Correctly securing the soundproofing material.

A common reason why soundproofing material fails is because it is not properly isolated from the surfaces which are transmitting the problem noise. For example many people purchase floating floors in an attempt to reduce noise transmission between levels. This often fails because the floating floor is not adequately isolated from the original floor. Floating floor manufactures usually provide a cheap thin membrane to put down on the existing floor before installing the floating floor. The manufactures usually assure you that you are doing the right thing. Sadly it seems few floating floor retailers know very much about soundproofing. What’s more it seems that few retailers of any of the products commonly used in soundproofing systems really have a good understanding of soundproofing science and the hidden traps.

2) Correctly placing the soundproofing material.

Even if the soundproofing material is correctly installed and secured, unless it is installed in the right place it might not solve the noise problem. For example a product called mass loaded vinyl (MLV) is a very effective soundproofing material. If MLV were used to reduce sound transmission between two levels of a dwelling, it would work very well if secured to the ceiling of the lower dwelling i.e. under the noisy floor but it would have poorer performance if installed on top of the noisy floor.

A great help to domestic soundproofing is reliable do-it-yourself information which is clearly laid out with simply diagrams and unbiased materials reviews.

Mistake 9: Not Following the Right SoundProofing Technique

Again this mistake relates to having reliable unbiased do-it-yourself information which is clearly laid out and which you can carefully follow.

Remember a properly placed piece of soundproofing can fail if you lose your way during the installation process. There is a lot of data to suggest that a small break in any soundproofing “system” can results in profound reduction in its performance.

This is not something you have to worry about if you are patient person and you are prepared to be careful and follow a good set of instructions. Again, more reason enough to ensure that your mind is in the right place, that you are calm and are not rushing desperately and erratically to get rid of the noise pollution. See Mistake 5.

Mistake 10: Thinking Gaps are Bad so Cavities Must be Too.

Many people believe that the secret to solving noise problems is filling or packing spaces.

It’s true that the first step in any soundproofing plan is making things airtight but this is very different to filling spaces in walls, floors or windows. The truth is air in an airtight cavity can be an excellent soundproofing “material” in certain circumstances. To make the most of air cavities their size and number need to be carefully considered.

So as with all the points raised above, be careful not to rush into pumping, pouring or packing any cavities until you are very clear what it is you are trying to achieve – but definitely aim to make all walls, doors, windows and floors airtight.

Craig Williams
Founder

http://www.SoundProofingSecrets.com”>http://www.SoundProofingSecrets.com
Do-it-Yourself, Low Cost, Unbiased Home & Apartment Soundproofing

© 2009 SoundProofingSecrets.com

May be reprinted if acknowledgement & URL included.

© 2009 Craig R. Williams,
http://www.SoundProofingSecrets.com”>http://www.SoundProofingSecrets.com

3 Reasons You Should Use Woodworking Project Plans

Ever consider you might use woodworking project plans and improve your carpentry skills? A number of people have actually done that. Almost all never take steps in making their dream a real possibility. Many get tangled up within the doubts and negatives, because of this they never get to take advantage of the positives.

Let’s just hold on here now. We took on a big dose of negatives first in the lead paragraph. Let’s consider three reasons why you should use woodworking plans to assist you in your project and help you achieve maximum success when it comes to constructing something new from wood.

Firstly, on the positive side, allow me to point out that by careful planning you will achieve your desired result. O.K., I hear your objection, that I havnt got time to plan. It is a valid objection, I agree. However, allow me to provide for your attention the point that by using a decent set of plans will save you time allowing you to concentrate on your project..

Secondly, you truly should consider that having everything laid out for you will save you heaps of money. And, likewise, energy, as less trips required to the hardware store plus, better yet, all measurements and amounts of materials are all included.

Third and lastly, you will get to admire your finished project, which will mean that you can show all your friends and family, who will no doubt be impressed with your carpentry skills. You might even be able to share some helpful tips with them.

Within all of the above info lies a pretty good set of reasons in favor of using plans to help you when considering a woodworking project and by believing in yourself will ensure you get the job done to a high standard. What do You think?

You carpentry skills will shoot through the roof if you use woodworking project plans [http://www.topwoodworkingplans.info]. Get them now by visiting [http://www.topwoodworkingplans.info].

5 Simple Display Construction Ideas For Showing Off Your Kids’ Artwork

1. Magnetic board

This is one of the easier ways of displaying art, and is an alternative to the fridge door. You can use a wide variety of things to create your board, from kitchen trays to sheets of steel. If you want to be really creative, you can even get hold of some magnetic paint and include it in your interior decor. You can put your board up on the wall and move it out of sight when you want your house to look really neat and tidy.

2. Clips and wire

A cheap and simple way of displaying kids’ artwork is to hang up a wire between two walls in your home and clip art to it. Things like washing line wire and fishing wire will work, but you can also use curtain rods, or anything else which you can attach to your walls. This way you’ll have plenty of room for lots of art, but it will be kept up out of the way.

3. Scrapbook

A way of saving the work which didn’t quite make it to the wall is to store it in a scrapbook. Use foam pads to attach pieces neatly, as these are less messy than glue and tape, and bare less risk of ruining the pages. If you still think there are too many, you can scan them into your computer and create a digital scrapbook.

4. Shelves

If your kids have been making 3D artwork, such as small models, then a great way to show them off is to install some shelves. You can be really creative with your display construction, so see what kind of layouts you can come up with to compliment your interior decor. Shelves are also a neat and eye-pleasing way of displaying frames.

5. Frames and wall art

Probably the most simple way of displaying a picture is by sticking it on the wall. However, you can turn this method from tacky and messy to stylish and artistic with the addition of frames. These neaten things up and give you freedom with display construction, allowing you to create some creative and eccentric designs using different shapes and sizes. This is a great way of displaying your favourite pieces, but if you can’t pick your favourites, you can always swap around what gets displayed from time to time. There are frames available which can hold multiple pieces, so you can easily swap the picture in front for one behind. If you don’t want to use frames, you can create an easy display by putting up a decorated board and sticking up your kids’ work using sticky tac or adhesive foam pads.

Single and double sided
http://www.indexplastics.co.uk/products/point-of-sale/printing-accessories/adhesive-tapes-glue-dots”>foam pads available with Index at affordable rates. Visit them online at
http://www.indexplastics.co.uk”>http://www.indexplastics.co.uk to know more!

6 Simple Steps For You To Follow For A Clean And Organized Garage

Your garage’s main function is usually to safeguard and store your car, truck or motorcycles. That can’t take place if your garage has turned into a glorified storage unit, stuffed to the rafters with boxes,toys, tools, bikes, strollers and everything else you either don’t have room for or just don’t want in the house.

Below are 6 easy to follow steps that will help you clean and organize your garage and seize control once again.

Step 1 – get everything out of the garage and sort it all into groups. Categorize it all and put everything into groups with like items. For example, toys with toys, carpentry tools with carpentry tools, yard tools with yard tools etc. Make a pile for trash, anything you don’t want that you can sell in a garage sale and items to give away.

Step 2 – Get the appropriate organizational tools and supplies. After you’ve grouped everything, decide on exactly what tools and resources will help you organize these items better.

For example, do you need shelves? If so what kind… a free standing shelving system or shelves mounted to the wall? Do you need storage bins, cabinet systems, tool chests, peg boards, hanging roof systems, hanging bike racks, hooks etc.

Step 3 – Clean garage. As soon as you empty your garage it’s important to take time to sweep out all the loose debris and remove cobwebs. You’ll appreciate your garage much more if it’s clean so make sure to sweep and dust routinely.

Step 4 – Decor. This does not mean you need to remodel your garage into pseudo-living room, however you could think about a fresh coat of paint on the walls. Next think about the floor?

Lots of people prefer to paint and seal the floor of their garage to protect it from stains and also makes cleaning easy. Transforming your wall and floor surfaces will have a enormous effect on the appearance of your garage.

Step 5 – Arrange Items For Storage. As soon as you are done with cleaning the garage (floor and walls)now’s the time for you to put everything back. Place those items that you use on regularly within easy reach.

Put items less frequently used further back in the garage or higher up on shelves or in cabinets. Putting labels on shelves, bins and boxes will make it a lot easier for you to find what you’re looking for.

Step 6 – Lastly, make some rules for yourself and family members and implement them. Rules along the lines of, “Always return the items you used back to where you got them,” needs to be put into practice at all times if you plan on keeping your garage clean and organized.

If you follow these 6 simple steps, in no time you will have a clean and well organized garage. Not only will you be able to park your car in your garage but you’ll also be able to find anything want when you need it. One more thing, don’t forget to have a garage sale to help get rid of all those unwanted items and put some cash in your pockets!

A Clean and Organized Garage [http://organizing-closets.net/] will put you back in control. Discover what it’s like to find what you want when you want it.

12-Volt Solar Panels – How They Can Be Used To Power Up Your Boat or Recreational Vehicles (RV)

12-volt solar panels are the ideal solution for your power needs on boats and on recreational vehicles. This is because of their size and portability. They can be used together with your lead acid (or sealed lead acid) cells to serve every function you desire on your mobile home.

Solar panels are also known as photovoltaic (PV) panels. They are reliable and virtually maintenance free. Technology has also made PV panels more reliable than before. Thus they can now convert solar energy in a very efficient manner.

PV panels require solar radiation, thus they are most ideal for outdoor use. Boats and recreational vehicles are constantly exposed to the sun. Thus this makes them ideal candidates for solar panels to be fitted on.

There are many ways you can use PV panels. You can use them to supplement your energy needs, or you can use them to replace your generator altogether. The possibility of this happening depends on how much you are willing to spend, and how much space you have to install PV panels on your vehicle or watercraft.

There are many advantages to using solar power rather than fossil fuel:

1. You will not need to worry about diesel for your generators nor bring this noisy equipment for servicing every now and then. With solar panels, you can literally setup and forget about them.

2. You can stop pollution. This refers to air pollution as well as noise pollution. Have you noticed how much noise your generator produces and how much vibration it contributes to your boat hull?

3. You can chip in your effort to stop global warming. This is obvious. If everyone uses solar power for their energy needs, there will be lesser greenhouse gases released into the environment. Thus global warming will become less of an issue and the sea water level will not rise at such a dramatic rate.

4. PV panels can trickle charge your batteries so you will never have flat batteries while your big toys are in storage.

When buying solar panels, you have to be careful about its specifications and packaging. If you are going to mount PV panels on your recreational vehicle, make sure that they can withstand the vibrations coming from the vehicle.

If you are going to use your PV panels on board your boat, you obviously have to take note of vibration issues as well. You will also need to make sure your PV panel frame is not made of materials prone to corrosion. If the PV panels are made of stainless steel or plastic, please enquire to find out if they are suitable for marine environment. This is because there are different grades of stainless steel and different types of polymers used to manufacture plastic.

Ignorant salesmen may push you products that are only suited for land use. Or they may sell you models that cannot take too much vibration. Thus you have to ask questions before you decide on a particular 12-volt solar panel for your boat or recreational vehicle.

As you can see, there are many benefits as well as “hidden” pitfalls when constructing DIY solar [http://www.diysolarpanelsworld.com/10-diy-solar-projects-you-can-build-in-your-backyard-this-weekend] panels. If you’re interested in building a successful project, you may want to visit [http://www.diysolarpanelsworld.com] to widen your knowledge base and to learn from hobbyists who may have more experience.